Претражујте по VIN, марки, моделу, типу камиона, називу јединице или према броју артикла било ког уља:
Mack Anthem MP8, година производње од 2017 - Моторно уље, уље за аутоматски мењач, уље за мењач, антифриз, кочиона течност, течност за серво управљач и друге течности.
Чворови и агрегати
Аутоматски мењач Allison 4000, 6/2
RAVENOL LKW ATF Synthetik allows oil change intervals to be extended even under severe operating conditions. A new type of additive technology allowed ultimate performance to be achieved with respect to ideal and constant friction characteristics, excellent shearing stability, and fluidity at low temperatures, steady wear protection and outstanding oxidation stability.
Усклађеност са захтевима:
Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Type Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N
Аналози OEM:
GM 12378515, GM 88900701, MB A001989730309, MB A001989730309
- Доступно паковање
- Параметри производа
Обим:
4 l
Артикал:
1211104-004
Обим:
10 l
Артикал:
1211104-010
Обим:
20 l, ecobox
Артикал:
1211104-B20
Обим:
60 l
Артикал:
1211104-060
Обим:
60 l, štampano bure
Артикал:
1211104-D60
Обим:
1 000 l
Артикал:
1211104-700
RAVENOL LKW ATF Synthetik allows oil change intervals to be extended even under severe operating conditions. A new type of additive technology allowed ultimate performance to be achieved with respect to ideal and constant friction characteristics, excellent shearing stability, and fluidity at low temperatures, steady wear protection and outstanding oxidation stability.
Application Note
RAVENOL LKW ATF Synthetik was developed for use in automatic transmissions in motor vehicles as well as torque converter and power-shift transmissions with the indicated specifications.
Characteristics
- reliable protection from wear, sludge, adhesion and corrosion
- excellent, highly shearing stable viscosity-temperature properties
- no problems in very low and very high temperatures
- a thermally extremely high load capacity
- non-foaming even in extreme conditions
- neutral behavior towards sealing materials
RAVENOL special transmission fluids are special developments for special gears and cannot be selected on the basis of technical parameters (viscosity, etc.). Therefore the decision was made not to give technical data. Please note: RAVENOL special transmission fluid is exclusively to apply under the original number, as indicated in the product information. If you are unsure about the right transmission fluid, ask your workshop or dealership for advice on the transmission type and OEM original number or ask our experts, making sure to state the VIN code (vehicle identification number) of your vehicle. Misapplication of RAVENOL special transmission fluid can lead to malfunction of the transmission shifting problems, increased fuel consumption, unwanted slip behavior, etc. and cause the failure of the transmission. Ravensberger Schmierstoffvertrieb GmbH is not liable for transmission failures in case of wrong selection of RAVENOL special transmission fluid.
| Параметар | Мерна јединица | Вредност | Тестирање | |
|---|---|---|---|---|
| Препоруке | Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N |
Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N
|
||
| Brand | RAVENOL |
RAVENOL
|
||
| Тип | Синтетички |
Синтетички
|
||
| Испуњава захтеве | Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Type Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N |
Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Type Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N
|
||
| Густина на 20°Ц | g/cm³ | 834 | EN ISO 12185 |
834
g/cm³
EN ISO 12185
|
| Боја | Црвени | visual |
Црвени
visual
|
|
| Вискозност на 100°C | mm²/s | 7.5 | DIN 51562-1 |
7.5
mm²/s
DIN 51562-1
|
| Вискозност на 40°C | mm²/s | 32 | DIN 51562-1 |
32
mm²/s
DIN 51562-1
|
| Индекс вискозности VI | 191 | DIN ISO 2909 |
191
DIN ISO 2909
|
|
| Тачка стињавања | °C | -54 | DIN ISO 3016 |
-54
°C
DIN ISO 3016
|
| Температура паљења | °C | 226 | DIN EN ISO 2592 |
226
°C
DIN EN ISO 2592
|
| Толеранције | Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Type Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N |
Allison TES-295, Allison TES-468, Caterpillar 6-speed CX31, Caterpillar 8-speed Super-Heavy-Duty CX35, DTFR 13C180 (MB 236.91), MAN 339 Type Z4, MB 236.91, Renk Doromat, Voith H55.63353x (G607), Voith H55.63363x (G1363), ZF TE-ML 14E, ZF TE-ML 16N
|
Механички мењач T-300
RAVENOL Truck MTF-50 is based on synthetic base oils and special additives matched to them. Thus, the extended requirements of Eaton axle and transmission divisions are fulfilled.
Усклађеност са захтевима:
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
API: MT-1
- Доступно паковање
- Параметри производа
Обим:
1 l
Артикал:
1221106-001
Обим:
4 l
Артикал:
1221106-004
Обим:
10 l
Артикал:
1221106-010
Обим:
20 l
Артикал:
1221106-020
Обим:
60 l
Артикал:
1221106-060
Обим:
208 l
Артикал:
1221106-208
RAVENOL Truck MTF-50 is based on synthetic base oils and special additives matched to them. Thus, the extended requirements of Eaton axle and transmission divisions are fulfilled.
RAVENOL Truck MTF-50 is ideally suited for severe operating conditions and extended oil change intervals.
Application Note
RAVENOL Truck MTF-50 is recommended for extended drain an severe service in heavy duty (class 6, 7, and 8) manual transmissions requiring a non-EP lubricant.
Characteristics
- Excellent thermal stability.
- Strong protection against rust, corrosion and foaming.
- A very low pour point.
- Excellent EP properties.
- A good switching behavior at low temperatures.
- An extended service life.
- Fuel savings.
| Параметар | Мерна јединица | Вредност | Тестирање | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Тип | Потпуно синтетички |
Потпуно синтетички
|
||
| API | MT-1 |
MT-1
|
||
| Испуњава захтеве | Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L |
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
|
||
| Густина на 20°Ц | g/cm³ | 857 | EN ISO 12185 |
857
g/cm³
EN ISO 12185
|
| Боја | Бровн | visual |
Бровн
visual
|
|
| Вискозност на 100°C | mm²/s | 17.5 | DIN 51562-1 |
17.5
mm²/s
DIN 51562-1
|
| Вискозност на 40°C | mm²/s | 132 | DIN 51562-1 |
132
mm²/s
DIN 51562-1
|
| Индекс вискозности VI | 146 | DIN ISO 2909 |
146
DIN ISO 2909
|
|
| Вискозност | Брукфилд на -26˚Ц | 16.900 | ASTM D2983 |
16.900
Брукфилд на -26˚Ц
ASTM D2983
|
| Тачка стињавања | °C | -45 | DIN ISO 3016 |
-45
°C
DIN ISO 3016
|
| Температура паљења | °C | 221 | DIN EN ISO 2592 |
221
°C
DIN EN ISO 2592
|
| Испитивање корозије бакра | на 121ºЦ / 3х | 1a | ASTM D130 |
1a
на 121ºЦ / 3х
ASTM D130
|
| Толеранције | Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L |
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
|
Задњи диференцијал Mack
RAVENOL Truck MTF-50 is based on synthetic base oils and special additives matched to them. Thus, the extended requirements of Eaton axle and transmission divisions are fulfilled.
Усклађеност са захтевима:
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
API: MT-1
- Доступно паковање
- Параметри производа
Обим:
1 l
Артикал:
1221106-001
Обим:
4 l
Артикал:
1221106-004
Обим:
10 l
Артикал:
1221106-010
Обим:
20 l
Артикал:
1221106-020
Обим:
60 l
Артикал:
1221106-060
Обим:
208 l
Артикал:
1221106-208
RAVENOL Truck MTF-50 is based on synthetic base oils and special additives matched to them. Thus, the extended requirements of Eaton axle and transmission divisions are fulfilled.
RAVENOL Truck MTF-50 is ideally suited for severe operating conditions and extended oil change intervals.
Application Note
RAVENOL Truck MTF-50 is recommended for extended drain an severe service in heavy duty (class 6, 7, and 8) manual transmissions requiring a non-EP lubricant.
Characteristics
- Excellent thermal stability.
- Strong protection against rust, corrosion and foaming.
- A very low pour point.
- Excellent EP properties.
- A good switching behavior at low temperatures.
- An extended service life.
- Fuel savings.
| Параметар | Мерна јединица | Вредност | Тестирање | |
|---|---|---|---|---|
| Brand | RAVENOL |
RAVENOL
|
||
| Тип | Потпуно синтетички |
Потпуно синтетички
|
||
| API | MT-1 |
MT-1
|
||
| Испуњава захтеве | Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L |
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
|
||
| Густина на 20°Ц | g/cm³ | 857 | EN ISO 12185 |
857
g/cm³
EN ISO 12185
|
| Боја | Бровн | visual |
Бровн
visual
|
|
| Вискозност на 100°C | mm²/s | 17.5 | DIN 51562-1 |
17.5
mm²/s
DIN 51562-1
|
| Вискозност на 40°C | mm²/s | 132 | DIN 51562-1 |
132
mm²/s
DIN 51562-1
|
| Индекс вискозности VI | 146 | DIN ISO 2909 |
146
DIN ISO 2909
|
|
| Вискозност | Брукфилд на -26˚Ц | 16.900 | ASTM D2983 |
16.900
Брукфилд на -26˚Ц
ASTM D2983
|
| Тачка стињавања | °C | -45 | DIN ISO 3016 |
-45
°C
DIN ISO 3016
|
| Температура паљења | °C | 221 | DIN EN ISO 2592 |
221
°C
DIN EN ISO 2592
|
| Испитивање корозије бакра | на 121ºЦ / 3х | 1a | ASTM D130 |
1a
на 121ºЦ / 3х
ASTM D130
|
| Толеранције | Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L |
Arvin Meritor 0-81, Eaton PS-164 Rev. 7, International Harvester TMS-6816, Mack TO-A Plus, ZF FreedomLine, ZF TE-ML 02L
|
