Резултати претраге за упит «68»

RAVENOL Turbinenöl T 68 is based on high quality mineral base oils with agents to increase the corrosion protection and aging resistance.

RAVENOL Turbinenöl T 68 is a universal mineral oil for turbines of especially chosen refined base oils with a natural high viscosity index. So-called “metal deactivators” are added to the turbine oil in addition to the normal additives in order to guarantee the excellent characteristics.

Application Note

RAVENOL Turbinenöl T 68 is used in fixed gas and steam turbines as well as electrical machines or machines driven by steam turbines like generators, compressors, pumps and transmissions.

RAVENOL Turbinenöl T 68 can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings in case of problems of the contamination with water because a high protection against rust and oxidation is requested.

Characteristics

• an excellent thermic and oxidative stability
• an excellent viscosity temperature behaviour
• a high and stable viscosity index
• a very good oxidation stability also at very high temperatures
• a good protection against corrosion of Ferro and non Ferro metals
• an excellent water separation behaviour
• a very good air separation behaviour which excludes foam formation as far as possible
• a low pour pointa good corrosion behaviour
• an excellent water separation behaviour / demulsifying behaviour

RAVENOL WAERMETRAEGEROEL 68 – минерално уље је расхладно средство које је погодно за рад затворених система преноса топлоте у индустрији.

RAVENOL WAERMETRAEGEROEL 68 – обезбеђује високу топлотну проводљивост у комбинацији са високом топлотном стабилношћу и високом отпорношћу на оксидацију.

RAVENOL WAERMETRAEGEROEL 68 – одлично расхладно уље које испуњава високе захтеве.

Примена:

RAVENOL WAERMETRAEGEROEL 68 посебно погодан за примену у затвореним системима грејања. Максимална температура протока не сме бити већа од 320°C. Максимална температура уљног филма је 350°C. треба избегавати директан контакт уља са околним ваздухом, јер то убрзава старење. Препоручује се чишћење целог система за размену топлоте пре сваког новог пуњења. Неочишћена инсталација не постиже оптималну ефикасност.

Предности и својства:

RAVENOL WAERMETRAEGEROEL 68 обезбеђује:

• стабилну вискозност
• високу топлотну проводљивост
• високу отпорност на оксидацију
• заштиту од корозије

RAVENOL Bettbahnoel 68 is characterized by good lubricating and sliding properties as well as high tackiness.

RAVENOL Bettbahnoel 68 is formulated with mineral base oils and contains additives and corrosion inhibitors to prevent rust formation and stains on slide ways and track surfaces.

RAVENOL Bettbahnoel 68 is compatible with most of drilling-, cutting or grinding emulsions. The lubricant film of the slide way oil is not washed off.

Application Note

RAVENOL Bettbahnoel 68 can be used for all types of lubrication systems such as pressure, circulating or central lubrication. If necessary, it can be applied manually. It can also be used for lubricating bearings and gear boxes.

Characteristics

• Very good stick-slip characteristics
• High tackiness
• Good corrosion protection, no rust and stain formation
• Resistance to aqueous metalworking fluids
• Good demulsification

RAVENOL Screw Kompressorenöl SCR 68 is optimal alloyed, has a high performance level and a wide application area of the whole industry. It is characterised by a good viscosity temperature behaviour, a high aging resistant and a solid corrosion protection. Efficient additives offer an excellent corrosion protection even under extreme loads. The behaviour of sealing materials is neutral.

Application Note

RAVENOL Screw Kompressorenöl SCR 68 is used in compressors.

Characteristics

• a high performance level
• a very good viscosity temperature behaviour
• a high aging resistant
• an excellent corrosion protection
• a solid corrosion protection
• neutrality of sealing materials

RAVENOL ODL 68 Druckluftoel is a special-compressed-air-oil for pneumatic tools of all systems.

RAVENOL ODL 68 Druckluftoel bonds condensed water, has an excellent corrosion protection, wear protection and an extraordinary pressure absorption capacity, a good adhesive power and high aging resistance. Easily conveying- and spray ability, economy consumption. No deposits caused by cleaning effects. Full power of impact.

Application Note

RAVENOL ODL 68 Druckluftoel is specially suitable for pneumatic tools with sound-absorbing-case, for lubrication of rock drills, road breaker, chipping hammer and spade hammer, ram machines and other pneumatic aggregates. Application by pre-switch-lubricator according to working instructions or usable directly in the air pipe. Please follow the manufacturer´s instructions.

Characteristics

• a high performance level
• a very good viscosity temperature behaviour
• a high aging resistant
• an excellent corrosion protection
• a solid corrosion protection
• neutrality of sealing materials

RAVENOL Kompressorenoel PAO VDL 68 is a premium quality compressor oil of the ISO VG Class 68, which is specially designed to extend the service life time of compressors.

RAVENOL Kompressorenoel PAO VDL 68 contains additives, which ensure an excellent wear protection and protects against residue and corrosion (both steel and non-ferrous metal). Most compressors have to work under high temperature so that the used oil has to have a good aging resistance but also a low residue building.

In addition RAVENOL Kompressorenoel PAO VDL 68 conforms to its ISO VG Class and shows a remarkable low evaporative behavior an outstanding demulsifying power as well as excellent air separation ability. It ensures certain lubrication not only in the high temperature range but also in cold condition of the compressor to reach a wear minimisation. By the use of selected and matched additives the tendency of coking and flammable residues is minimized.

Application Note

RAVENOL Kompressorenoel PAO VDL 68 is recommended for all compressors especially in rotary scew air compressors.

Characteristics

• High oxidation stability.
• Excellent protection against rust and corrosion.
• Best wear protection. Keeps compressor components free of sludge and varnish to ensure trouble free operation and lower maintenance costs on fluid change-out.
• Very low evaporative behavior and an outstanding demulsifying power.
• Excellent air separation ability.
• Better resistance to oxidative breakdown
• Extends oil change intervals up to 8.000 hours service in rotary screw compressors and 1.000 hours service in rotary vane compressors.
• Improves compressor operating efficiency, lower energy consumption costs by reducing of oil thickening.

RAVENOL Kompressorenoel VDL 68

is a special ageing-resistant-lubricating oils offering minimal coking based on high-quality age-resistant base oils with ash less additives to improve corrosion protection and ageing stability and meets the high requirements of DIN 51 506.

RAVENOL Kompressorenoel VDL 68 has a good adhesion, is water repellent and wear reducing. As many compressors operate at high temperatures, the oil should have good aging resistance at very low residue formation.

RAVENOL Kompressorenoel VDL 68 provides a secure lubrication not only in the upper temperature range, also in the cold state of the compressor to achieve a reduction of wear. By selected and coordinated additive composition the tendency to coking and the formation of flammable residues is minimized.

Application Note

RAVENOL Kompressorenoel VDL 68 can be used in stationary and mobile compressors with discharge temperatures up to 220°C.

RAVENOL Kompressorenoel VDL 68 can also be used for lubrication of engines and diesel engines where the manufacturer does not stipulate any HD motor oil.

RAVENOL Kompressorenoel VDL 68 is not recommended for ATLAS COPCA GA xx series compressors.

Exceeds the requirements for VBL- and VCL-Oils.

Characteristics

• Ashless active substances
• Excellent aging resistance
• Reliable wear protection
• Excellent viscosity-temperature behavior
• Very good cold starting properties
• Low coking tendency
• Neutral towards sealing materials

is a zinc and ash-free compounded oil based phosphorous and sulfur intended especially for use in the metal industry. Excellent results were achieved in the Timken test. Through the addition of selected ingredients,

RAVENOL Hydraulikoel TS AF 68

has excellent wear protection, good oxidation stability and has a long service life even under extreme conditions. Compatibility with sealants is neutral. Furthermore, the additives provide corrosion protection and prevent foaming.

RAVENOL Hydraulikoel TS AF 68

exceeds the requirements of DIN 51 524 part 2 for HLP hydraulic oils.

Application Note

RAVENOL Hydraulikoel TS AF 6

is for use as a hydraulic fluid in the metal industry, if zinc and ash-free hydraulic oil and the specification DIN 51 524, Part 2 is required.

Compared with products of vegetable triglyceride base, RAVENOL BIO-Hydraulikoel HEES 68 has much better high temperature oxidation stability.

Application Note

RAVENOL BIO-Hydraulikoel HEES 68 is used wherever there is the danger of hydraulic fluid leaking into the ground or waste water. This includes all equipment operating in or near areas of water purification or water protection or near surface water, such as e.g. sewage treatment plants, dredging ships and floating dredges, lock hydraulics and river weirs, pipe and tunnel diving machines, - hydraulic aggregates in forests and on plains, earth moving machines in water collecting areas, forestry machines.

RAVENOL Hydraulikoel HLP-D 68 is designed with selected base oils with additives to prevent corrosion, wear and friction.

RAVENOL Hydraulikoel HLP-D 68 also contains detergent and dispersing agents, which always provide for a clean hydraulic system. These additives dissolve contaminants, hold them in suspension and enabling the cleaning of contaminated hydraulic systems. The functional elements of a hydraulic system thereby remain free of deposits and bonds. This will emulsified penetrating water and ensure trouble-free operation of the hydraulic system.

Application Note

RAVENOL Hydraulikoel HLP-D 68 is for use in agriculture hydraulic systems, construction machinery, cement factories, foundries, and electro-plate clutches. It can also be used as functional test oil, inlet oil for aggregates and machinery, textile machinery and machine tools.

Characteristics

• High aging resistance and high corrosion protection
• Good air release
• Excellent wear protection and proper conduct foam
• Very good viscosity-temperature behaviour
• neutral behaviour towards sealing materials
• Extremely good detergent and dispersant characteristics
• Excellent corrosion protection even at the ingress of wetness

RAVENOL Hydraulikoel TSX 68 (HVLP) – минерално хидрауличко уље класе HVLP. Због примене висококвалитетног базног уља и специјалног комплекса адитива обезбеђују се добре вискозитетно-температурне карактеристике и поуздана заштита од корозије и хабања при високим оптерећењима, као и неутралан однос према заптивним материјалима.

Примена:

Хидраулично уље RAVENOL Hydraulikoel TSX 68 (HVLP) користи се у грађевинарству за тешке услове рада и хидрауличким системима у каменоломима, укључујући хидрауличне пумпе велике брзине и високог притиска, зупчасте и аксијалне клипне пумпе.

Не користити у присуству сребрних или посребрених детаља у хидравличким системима.

CСпецификације:

RAVENOL Hydraulikoel TSX 68 (HVLP) испуњава следеће спецификације:

Спецификације: DIN 51524, ISO 6743-4-HV, Teil 3 HVLP

Рекомендовано: AFNOR 48-603 HV, CETOP RP 91H HV, Cincinnati Milacron P-68 (HM-32), Cincinnati Milacron P-69 (HM-68), Cincinnati Milacron P-70 (HM-46), FZG 12, GM LH-04-1, GM LH-06-1, GM LH-15-1, Parker Denison HF-0, Parker Denison HF-1, Parker Dension HF-2, Sperry Vickers I-286-S, Sperry Vickers M-2950-S, US Steel 127, US Steel 136, Vickers Vane Pump

Предности и својства:

RAVENOL Hydraulikoel TSX 68 (HVLP) обезбеђује:

- Доследно висок индекс вискозности

- Одличну заштиту од хабања

- Заштиту од корозије

- Одлична својства одвајања ваздуха и воде за спречавање стварања пене

- Неутралан према гуменим заптивкама

- Ниску тачку течења

RAVENOL Getriebeoel CLP 68 has a low pour point and therefore a very good cold behaviour.

Application Note

RAVENOL Getriebeoel CLP 68 can be used as a lubricant in nearly all industrial gear drives due to its good stress and/or impact characteristics.

Characteristics

• A very good, stable high-pressure impact capacity
• Resistant characteristics at high temperatures
• A good rust and corrosion impeding effect
• Excellent wear protection
• Very good anti-foaming characteristics
• A low pour point
• Very good cold behaviour

RAVENOL Vakuumpumpenoil ISO VG 68 је оптимално легирано минерално вакуумско уље са високим перформансама и широким спектром примене у релевантној области.

Одликује се добрим вискозно-температурним карактеристикама, високом отпорношћу на старење и поузданом заштитом од корозије. Пажљиво одабран пакет адитива пружа одличну заштиту од хабања под супер тешким оптерећењима. Неутрално у односу на заптивне материјале.

RAVENOL Vakuumpumpenoil ISO VG 68 користи се за подмазивање вакуум пумпи (крилне пумпе, дифузионе пумпе, турбопумпе), где је потребна употреба минералног уља, а користи се и за подмазивање картера.

Примена Vakuumpumpenoil ISO VG 68 обезбеђује:

• Висок ниво перформанси
• Одличне вискозно-температурне особине
• Одличну заштиту од хабања
• Врхунску заштиту од корозије
• Високу отпорност на оксидацију
• Изврсна својства демулговања
• Изврсна својства демулговања, која у великој мери елиминишу стварање пене
• Неутрално понашање у односу на заптивне материјале
• Ниску тачку течења

RAVENOL Hydraulikoel TS 68 (HLP) – минерално хидрауличко уље класе HLP са додатком адитива високих перформанси. Оптимално легиран, обезбеђује продужени интервал замене и широк распон радних температура у различитим индустријским областима примене. Гарантује добре перформансе вискозне температуре, високу отпорност на старење и поуздану заштиту од корозије. Захваљујући посебном пакету адитива, пружа заштиту од хабања под екстремним оптерећењима.

Примена:

RAVENOL Hydraulikoel TS 68 (HLP) универзално за примену у било којим хидрауличким системима. Препоручује се за термички оптерећене хидрауличне системе, са пумпама високог притиска, као и за одржавање малих механизама и као радна течност у затвореним системима.

Спецификације:

RAVENOL Hydraulikoel TS 68 (HLP) у складу са следећим стандардима и спецификацијама:

Спецификације: DIN 51524-2 (HLP), ISO 6743-4 HM

Допуштања: рударска опрема Eickhoff-Bergbautechnik: Препоручено: према упутствима

Испуњава захтеве: SIS SS 155434ZF TE-ML 07, HMETSOGENERAL MOTORS LH-02-1-04, FIVES CINCINNATI P-70, FIVES CINCINNATI P-55, ATOS, US STEEL 126, ISO 11158 HM, GB 111118.1 L-HM (CONVENTIONAL), ASTM D6158, VICKERS-PUMPENTEST FZG-TEST A 8 3/90: DIE 12. LASTSTUFE WIRD SICHER ERREICHT, MIL-PRF-17672E, SAE MS1004 HM, SEB 181 222, SWEDISH STANDARD SS 155434, US STEEL 127, US STEEL 136, VDMA 24318, BOSCH REXROTH RE 90220, CETOP RP 91H HM, DANIELI HYDRAULICS, DENISON HF-0, DENISON HF-1, DENISON HF-2, EATON VICKERS I-286-S, EATON VICKERS M-2950-S, GENERAL MOTORS LS-2, MÜLLER WEINGARTEN, SAUER-DANFOSS 520L0463, HOESCH HWN 2333

Предности и свойства:

RAVENOL Hydraulikoel TS 68 (HLP) обезбеђује:

• продужени интервал замене
• добре перформансе вискозне температуре
• високу отпорност на старење
• одличну заштиту од хабања
• поуздану заштиту од корозије
• неутралност према заптивним материјалима